The VENTRILOQUIST - Voice Release is available for both trap and skeet. Both units use microprocessor based technology to recognize a voice and provide selectable target sequences (skeet) and delay options. The skeet version may also be used for trap. Two options are available, the Radio-Linked (skeet transmitter, trap transmitter, skeet receiver, trap receiver) version and the Wire-Linked (skeet wire-linked, trap wire-linked) version. The essential difference between the two versions is that the shooter's signal to the target machine(s) is transmitted via an FM signal in the "Radio-Linked" version versus a cable in the "Wire-Linked" version. Both units come standard with a lapel microphone and custom case. A throat microphone is available as an extra cost option.
|
|
![]()
|
VEN-Wireless-Trap Transmitter and Receiver
|
Part No: VEN-Wireless-Trap
Number of Microphones: 1
Wired or Wireless?: Wireless
• 12 V Power Source
• Trap Transmitter
• The wireless unit uses microprocessor based technology to recognize a voice
and provide selectable target sequences (skeet) and delay options.
• The shooter's signal to the target machine(s) is transmitted via an FM
signal
• Each additional release is $250.00
Trap Transmitter
Actual Dimensions -- 5.5" X 3.5" X 1.25" |
 |
- 1. PWR (Power)
- Turns transmitter on/off.
|
- 2. PTR (Push To Release)
- Manual target release.
|
- 3. MICROPHONE SENSITIVITY
- Sets minimum level of sound
required to activate "voice"
recognition program.
|
- 4. TEST
- Flashes when "voice" is
recognized and signal transmitted.
|
- 5. LOW BATTERY
- Is lit when battery is too
low for effective operation.
|
Trap Receiver
Actual Dimensions -- 6.25" X 3.5" X 1.75" |
 |
- 1. ON/OFF
- Turns receiver on/off.
|
- 2. DELAY
- Sets release time
- •INT • BAD
- Bad Puller delay on trap versions.
|
- 3. LED (Light Emitting Diode)
- LED shows when target is released.
|
|
|
Price:
$650.00
|
|
![]()
|
VEN-Wireless-Skeet Transmitter and Receiver
|
Part No: VEN-Wireless-Skeet
Number of Microphones: 1
Wired or Wireless?: Wireless
• 12 V Power Source
• Skeet Transmitter
• The wireless unit uses microprocessor based technology to recognize a voice
and provide selectable target sequences (skeet) and delay options.
• The shooter's signal to the target machine(s) is transmitted via an FM
signal
• Each additional release is $300.00
Skeet Transmitter
Actual Dimensions -- 5.5" X 3.5" X 1.25" |
 |
- 1. PWR (Power)
- Turns transmitter on/off.
|
- 2. S(equence), D(oubles), L(ow), H(igh)
- Selects target to be released.
(SKEET VERSION ONLY)
|
- 3. PTR (Push To Release)
- Manual target release.
|
- 4. MICROPHONE SENSITIVITY
- Sets minimum level of sound
required to activate "voice"
recognition program.
|
- 5. TEST
- Flashes when "voice" is
recognized and signal transmitted.
|
- 6. LOW BATTERY
- Is lit when battery is too
low for effective operation.
|
Skeet Receiver
Actual Dimensions -- 6.25" X 3.5" X 1.75" |
 |
- 1. ON/OFF
- Turns receiver on/off.
|
- 2. RESET
- Reset sequence to beginning (High 1).
|
- 3. SEQUENCE
- Selects American or International target sequence.
|
- 4. NUMBER OF SHOOTERS
- SHOOTERS (1 TO 5).
"DASH" arms International Skeet delay.
"DOT" changes International Skeet delay
to Bad Puller delay.
|
- 5. DELAY
- Sets release time
- •NONE
- Instantaneous Release
- •NORMAL
- .2 sec. delay (Corresponds to reaction
time of average puller.)
- •INT • BAD
- Intrntnl Skt random delay (0 - 3 sec.)
if Number of Shooters selected by "DASH"
Bad Puller delay if Number of Shooters
selected by "DOT".(random .1 -.4 sec.)
|
- 6. LED(s) (Light Emitting Diode)
- LEDs show which target is being released (High/Low).
|
|
|
Price:
$795.00
|